Seldén Split pin ø4×20,A4 Stainless

Description

Beskrivning

Split pins must be 1.5 x the diameter of the clevis pins in length, and the legs must be bent min. 2×10˚ to lock them. If opened up more than this, they are difficult to remove. Split pins that have been opened more than 10 times must be replaced.All split pins should be protected with fabric tape. A spinnaker or gennaker can easily be torn by a sharp split pin end, and running rigging can get hooked in a split pin. This will damage the split pin and could pull it out of the clevis pin, allowing the clevis pin to fall out of the associated fitting.SubType: pin Diameter: 3.70 mmLength: 20 mm